thallada.github.io/_posts/2017-06-20-how-to-install-tensorflow-on-ubuntu-16-04.md

---
title: How to Install TensorFlow on Ubuntu 16.04 with GPU Support
layout: post
---

I found the [tensorflow
documentation](https://www.tensorflow.org/install/install_linux) rather lacking
for installation instructions, especially in regards to getting GPU support.
I'm going to write down my notes from wrangling with the installation here for
future reference and hopefully this helps someone else too.

This will invariably go out-of-date at some point, so be mindful of the publish
date of this post. Make sure to cross-reference other documentation that has
more up-to-date information.

## Assumptions

These instructions are very specific to my environment, so this is what I am
assuming:

1. You are running Ubuntu 16.04. (I have 16.04.1)
    - You can check this in the output of `uname -a`
2. You have a 64 bit machine.
    - You can check this with `uname -m`. (should say `x86_64`)
2. You have an NVIDIA GPU that has CUDA Compute Capability 3.0 or higher.
[NVIDIA documentation] has a full table of cards and their Compute Capabilities.
(I have a GeForce GTX 980 Ti)
    - You can check what card you have in Settings > Details under the label
      "Graphics"
    - You can also check by verifying there is any output when you run `lspci |
      grep -i nvidia`
3. You have a linux kernel version 4.4.0 or higher. (I have 4.8.0)
    - You can check this by running `uname -r`
4. You have gcc version 5.3.1 or higher installed. (I have 5.4.0)
    - You can check this by running `gcc --version`
5. You have the latest [proprietary](https://i.imgur.com/8osspXj.jpg) NVIDIA
drivers installed.
    - You can check this and install it if you haven't in the "Additional
      Drivers" tab in the "Software & Updates" application (`update-manager`).
      (I have version 375.66 installed)
6. You have the kernel headers installed.
    - Just run `sudo apt-get install linux-headers-$(uname -r)` to install them
      if you don't have them installed already.
7. You have Python installed. The exact version shouldn't matter, but for the
rest of this post I'm going to assume you have `python3` installed.
    - You can install `python3` by running `sudo apt-get install python3`. This
      will install Python 3.5.
    - Bonus points: you can install Python 3.6 by following [this
      answer](https://askubuntu.com/a/865569), but Python 3.5 should be fine.

## Install the CUDA Toolkit 8.0

NVIDIA has [a big scary documentation
page](http://docs.nvidia.com/cuda/cuda-installation-guide-linux/) on this, but I
will summarize the only the parts you need to know here.

Go to the [CUDA Toolkit Download](https://developer.nvidia.com/cuda-downloads)
page. Click Linux > x86_64 > Ubuntu > 16.04 > deb (network).

Click download and then follow the instructions, copied here:

1. `sudo dpkg -i cuda-repo-ubuntu1604_8.0.61-1_amd64.deb`
2. `sudo apt-get update`
3. `sudo apt-get install cuda`

This will install CUDA 8.0. It installed it to the directory
`/usr/local/cuda-8.0/` on my machine.

There are some [post-install
actions](http://docs.nvidia.com/cuda/cuda-installation-guide-linux/index.html#post-installation-actions)
we must follow:

1. Edit your `~/.bashrc`
    - Use your favorite editor `gedit ~/.bashrc`, `nano ~/.bashrc`, `vim
      ~/.bashrc`, whatever.
2. Add the following lines to the end of the file:
```bash
# CUDA 8.0 (nvidia) paths
export CUDA_HOME=/usr/local/cuda-8.0
export PATH=/usr/local/cuda-8.0/bin${PATH:+:${PATH}}
export LD_LIBRARY_PATH=/usr/local/cuda-8.0/lib64${LD_LIBRARY_PATH:+:${LD_LIBRARY_PATH}}
```
3. Save and exit.
4. Run `source ~/.bashrc`.
5. Install writable samples by running the script `cuda-install-samples-8.0.sh
~/`.
   - If the script cannot be found, the above steps didn't work :(
   - I don't actually know if the samples are absolutely required for what I'm
     using CUDA for, but it's recommended according to NVIDIA, and compiling
     them will output a nifty `deviceQuery` binary which can be ran to test if
     everything is working properly.
6. Make sure `nvcc -V` outputs something.
   - If an error, the above steps 1-4 didn't work :(
7. `cd ~/NVIDIA_CUDA-8.0_Samples`, cross your fingers, and run `make`
   - The compile will take a while
   - My compile actually errored near the end with an error about `/usr/bin/ld:
     cannot find -lcudart`. I *think* that doesn't really matter because the
     binary files were still output.
8. Try running `~/NVIDIA_CUDA-8.0_Samples/bin/x86_64/linux/release/deviceQuery`
to see if you get any output. Hopefully you will see your GPU listed.

## Install cuDNN v5.1

[This AskUbuntu answer](https://askubuntu.com/a/767270) has good instructions.
Here are the instructions specific to this set-up:

1. Visit the [NVIDIA cuDNN page](https://developer.nvidia.com/cudnn) and click
"Download".
2. Join the program and fill out the survey.
3. Agree to the terms of service.
4. Click the link for "Download cuDNN v5.1 (Jan 20, 2017), for CUDA 8.0"
5. Download the "cuDNN v5.1 Library for Linux" (3rd link from the top).
6. Untar the downloaded file. E.g.:
```bash
cd ~/Downloads
tar -xvf cudnn-8.0-linux-x64-v5.1.tgz
```
7. Install the cuDNN files to the CUDA folder:
```bash
cd cuda
sudo cp -P include/* /usr/local/cuda-8.0/include/
sudo cp -P lib64/* /usr/local/cuda-8.0/lib64/
sudo chmod a+r /usr/local/cuda-8.0/lib64/libcudnn*

```

## Install libcupti-dev

This one is simple. Just run:

```bash
sudo apt-get install libcupti-dev
```

## Create a Virtualenv

I recommend using
[virtualenvwrapper](https://virtualenvwrapper.readthedocs.io/en/latest/index.html)
to create the tensorflow virtualenv, but the TensorFlow docs still have
[instructions to create the virtualenv
manually](https://www.tensorflow.org/install/install_linux#InstallingVirtualenv).

1. [Install
virtualenvwrapper](https://virtualenvwrapper.readthedocs.io/en/latest/install.html).
Make sure to add [the required
lines](https://virtualenvwrapper.readthedocs.io/en/latest/install.html#shell-startup-file)
to your `~/.bashrc`.
2. Create the virtualenv:
```bash
mkvirtualenv --python=python3 tensorflow
```

## Install the TensorFlow with GPU support

If you just run `pip install tensorflow` you will not get GPU support. To
install the correct version you will have to install from a [particular
url](https://www.tensorflow.org/install/install_linux#python_35). Here is the
install command you will have to run to install TensorFlow 1.2 for Python 3.5
with GPU support:

```bash
pip install https://storage.googleapis.com/tensorflow/linux/gpu/tensorflow_gpu-1.2.0-cp35-cp35m-linux_x86_64.whl
```

If you need a different version of TensorFlow, you can edit the version number
in the URL. Same with the Python version (change `cp35` to `cp36` to install for
Python 3.6 instead, for example).

## Test that the installation worked

Save this script from [the TensorFlow
tutorials](https://www.tensorflow.org/tutorials/using_gpu#logging_device_placement)
to a file called `test_gpu.py`:

```python
# Creates a graph.
with tf.device('/cpu:0'):
  a = tf.constant([1.0, 2.0, 3.0, 4.0, 5.0, 6.0], shape=[2, 3], name='a')
  b = tf.constant([1.0, 2.0, 3.0, 4.0, 5.0, 6.0], shape=[3, 2], name='b')
c = tf.matmul(a, b)
# Creates a session with log_device_placement set to True.
sess = tf.Session(config=tf.ConfigProto(log_device_placement=True))
# Runs the op.
print(sess.run(c))
```

And then run it:

```bash
python test_gpu.py
```

You should see your GPU card listed under "Device mapping:" and that each task
in the compute graph is assigned to `gpu:0`.

If you see "Device mapping: no known devices" then something went wrong and
TensorFlow cannot access your GPU.